Difficulty
Moderate
Steps
9
Time Required
15 - 20 minutes
Sections
2
- Battery
- 2 steps
- Webcam
- 7 steps
Flags
3
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
Better Introduction
Improve this guide by completing or revising its introduction.
BackHP Pavilion DV2160BR
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Start with the bottom of the laptop facing up.
Start with the bottom of the laptop facing up.
1024
Step 2
- Locate the battery compartment at the rear of the device.
- There is a slider button located under the left side of the battery compartment. It is indicated by a battery symbol. Move the slider to the left and lift the battery out.
Locate the battery compartment at the rear of the device.
There is a slider button located under the left side of the battery compartment. It is indicated by a battery symbol. Move the slider to the left and lift the battery out.
Step 3
Webcam
- Flip over the laptop and open it.
Flip over the laptop and open it.
Step 4
- Remove the 6 rubber screw covers from the screen panel using the plastic opener tools by applying firm pressure to the edges.
- The 4 screw covers on top are attached by an adhesive backing.
- The 2 screw covers on the bottom are rubber plugs.
Remove the 6 rubber screw covers from the screen panel using the plastic opener tools by applying firm pressure to the edges.
The 4 screw covers on top are attached by an adhesive backing.
The 2 screw covers on the bottom are rubber plugs.
Step 5
- Remove the 4 M2.5x4-Lg #0 Phillips screws from the top of the screen panel.
- Remove the 2 M2.5x8-Lg #1 Phillips screws from the bottom of the screen panel.
Remove the 4 M2.5x4-Lg #0 Phillips screws from the top of the screen panel.
Remove the 2 M2.5x8-Lg #1 Phillips screws from the bottom of the screen panel.
Step 6
- Slide a plastic opener tool along the outside edges of the front screen panel to start to separate it from the back screen panel.
- You may need to apply some firm pressure to get it started.
- Once it has started to separate, gently pull off the screen panel by working along the edge, and set it aside.
Slide a plastic opener tool along the outside edges of the front screen panel to start to separate it from the back screen panel.
You may need to apply some firm pressure to get it started.
Once it has started to separate, gently pull off the screen panel by working along the edge, and set it aside.
Step 7
- Locate the screw on the left side of the cameras mounting bracket.
- Remove the M2.5x4-Lg #0 Phillips screw
Locate the screw on the left side of the cameras mounting bracket.
Remove the M2.5x4-Lg #0 Phillips screw
Step 8
- Pull the camera from the back screen panel and rotate it so you are looking at the back.
- Remove the 2 M2x3-Lg #00 Phillips screws and place the mounting bracket aside.
Pull the camera from the back screen panel and rotate it so you are looking at the back.
Remove the 2 M2x3-Lg #00 Phillips screws and place the mounting bracket aside.
Step 9
- Disconnect the cable on the right side of the camera board by pulling firmly on the connector.
Disconnect the cable on the right side of the camera board by pulling firmly on the connector.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Brandon MacDonald
Member since: 03/12/2014
239 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
UMass Dartmouth, Team 6-5, Vijaybhaskar Spring 2014
Member of UMass Dartmouth, Team 6-5, Vijaybhaskar Spring 2014
UMASSD-VIJAYBHASKAR-S14S6G5
3 Members
3 Guides authored
