Difficulty
Moderate
Steps
3
Time Required
5 minutes
Sections
1
- RAM
- 3 steps
Flags
Missing Prerequisites
This guide is missing information on how to start the process. Make a prerequisite guide!
BackHP Pavilion DV2160BR
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
RAM
- Start with the bottom of the laptop facing up.
- Locate the panel that is covering the RAM compartment.
- Unscrew the two 5mm Phillips #0 screws that are securing the RAM compartment.
Start with the bottom of the laptop facing up.
Locate the panel that is covering the RAM compartment.
Unscrew the two 5mm Phillips #0 screws that are securing the RAM compartment.
1024
Step 2
- Lift up the panel that is by the end that held the screws. Set it aside.
Lift up the panel that is by the end that held the screws. Set it aside.
Step 3
- Using 2 prying tools, push the 2 buttons on the sides of one RAM module simultaneously, so that one side of the module pops up and out of the clips holding it down.
- Grab the RAM module and carefully pull it straight out of its slot.
- Repeat this step for the second RAM module, which is located just underneath the first RAM module.
Using 2 prying tools, push the 2 buttons on the sides of one RAM module simultaneously, so that one side of the module pops up and out of the clips holding it down.
Grab the RAM module and carefully pull it straight out of its slot.
Repeat this step for the second RAM module, which is located just underneath the first RAM module.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 9 other contributors
Shannon
Member since: 04/11/2013
46 Reputation
6 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 13-66, Johann Spring 2013
Member of Cal Poly, Team 13-66, Johann Spring 2013
CPSU-JOHANN-S13S13G66
3 Members
6 Guides authored
