Difficulty

Moderate

Steps

2

Time Required

                          10 - 20 minutes            

Sections

1

  • Hard Drive
  • 2 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackHP Pavilion dv2000

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Hard Drive               
  • Flip your computer over, so that the underside of your computer is facing upward.
  • Make sure your computer is powered down and unplugged from the charger before removing any components.
  • Locate the hard drive casing on the bottom-right corner of your flipped computer.
  • Remove the two 3.8mm screws with your Phillips #00 Screwdriver and carefully lift up and remove the hard drive casing.
  • Screws on hard drive casing will remain in casing after being unscrewed.

Flip your computer over, so that the underside of your computer is facing upward.

Make sure your computer is powered down and unplugged from the charger before removing any components.

Locate the hard drive casing on the bottom-right corner of your flipped computer.

Remove the two 3.8mm screws with your Phillips #00 Screwdriver and carefully lift up and remove the hard drive casing.

Screws on hard drive casing will remain in casing after being unscrewed.

1024

Step 2

  • After you lift off the hard drive casing, using your Phillips #000 Screwdriver, remove the two 3.6mm screws located on the right side of the hard drive.
  • Using your fingers, carefully lift the lower right corner of your hard drive until it is removed from its housing.

After you lift off the hard drive casing, using your Phillips #000 Screwdriver, remove the two 3.6mm screws located on the right side of the hard drive.

Using your fingers, carefully lift the lower right corner of your hard drive until it is removed from its housing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Erik Muniz                     

Member since: 09/09/2014

820 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       CSU Fullerton, Team 2-3, Bruce Fall 2014                        

                                                  Member of CSU Fullerton, Team 2-3, Bruce Fall 2014 



                    CSUF-BRUCE-F14S2G3                     


                                            3 Members                     


                                            3 Guides authored                     

tml215 - Sep 15, 2019

Reply

You didnt mention this HDD has a different SATA connector , I cant find it in the market, instead of plug in , this one is for pressing down only