Difficulty

Moderate

Steps

5

Time Required

                          15 minutes - 1 hour            

Sections

1

  • Hdd
  • 5 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackHP Pavilion A600

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Hdd               
  • first take out the Phillips screw out of the side panel and then take off the side panel.

first take out the Phillips screw out of the side panel and then take off the side panel.

1024

Step 2

  • After you do that then unscrew the two Phillips types screws holding in the HDD deck by the front panel.

After you do that then unscrew the two Phillips types screws holding in the HDD deck by the front panel.

Step 3

              Pop out the deck               
  • Once you’ve done that then push the button down closer to the logic board right next to it the HDD deck and slide it to the right and pop it out.

Once you’ve done that then push the button down closer to the logic board right next to it the HDD deck and slide it to the right and pop it out.

Step 4

              Taking  the HDD out               
  • Unscrew the four screws holding the HDD in then take that unplug it and then take it out of the deck.

Unscrew the four screws holding the HDD in then take that unplug it and then take it out of the deck.

Step 5

              Putting the new one in               
  • Once you finish taking it then get your new HDD and then put it back in threw it back in the the deck put it back in the whole thing back in you’re done hope you liked it like it thanks bye.
  • thanks please like if you want more of these HDD teardown stuff then if you want me to show you how to modify this same with the floppy disk drive I will glad you guys if you guys

Once you finish taking it then get your new HDD and then put it back in threw it back in the the deck put it back in the whole thing back in you’re done hope you liked it like it thanks bye.

thanks please like if you want more of these HDD teardown stuff then if you want me to show you how to modify this same with the floppy disk drive I will glad you guys if you guys

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    McOfficialPlayYT                     

Member since: 02/28/2017

397 Reputation

                                      1 Guide authored                  



                       Badges:
                       11







                                                        +8 more badges